BowlerTransmissions.com :: Forum

4/19/2010 11:04:21 AM Carguy Posts: 16	Will the Bowler Lock-up control module work with a TH350 lock-up?
	permalink
4/28/2010 9:19:38 AM Joe Posts: 19	It will work on some models. There are two lock up systems for theTH350, a MV4 and a MX2, the MV4 uses a governor pressure switch which senses vehicle speed and will use a single wire to the connector. With this system the lock up control module will work. The MX2 transmission was used mostly in cars which used a two wire system and the computer grounded lock up. If your valve body has a plug on the back corner where the governor pressure switch would go, we could make it work. I have found that most of these don't even have a hole there and would require replacing the valve body to make it work.
	permalink

---