BowlerTransmissions.com :: Forum

4/29/2010 11:32:05 AM Carguy Posts: 16	I have a Cuda with a 904 trans. I am running about 450 ft. lb. of torque and wanted to know if a 727 trans will work and how much trouble the swap would be.
	permalink
4/29/2010 11:38:52 AM Joe Posts: 19	That's an easy one, we just need to know the year and engine size. There were two different bolt patterns on the torque converter, a 10" and an 11". The output yoke is larger on the A727 and the drive shaft will have to be shortened 3 1/2". All of your shift controls and cooler lines should work.
	permalink

---