BowlerTransmissions.com :: Forum

6/8/2010 3:41:30 PM Carguy Posts: 16	I am building a 440 with an 8-71 blower on it. I will only be running 9 - 10 psi of boost, However I run into the problem of finding a manual transmission that can handle the Torque output (estimated 700 - 800 ft/lbs). Would you guys be able to manufacture something that could handle that or do you know of someone that can? I am also looking for it to be a 5 or 6speed with an overdrive between .5 and .6 edited by Carguy on 6/8/2010
	permalink
6/8/2010 3:54:39 PM Joe Posts: 19	Unless you are putting this into a heavy truck application the only 6 speed that can handle that kind of torque and give you the overdrive ratio that you want is a T-56 Viper style transmission. This transmission is rated at 650 ft lb of torque and has ratios of 2.66/1.78/1.30/1.00/.74/.50). We also supply bell housings to fit the 440 engine as well as the flywheel, clutch and pressure plate. edited by Joe on 6/8/2010
	permalink

---