Tru-Shift Self-Adjusting TV Cable Kit — 700-R4 & 200-4R Throttle Correction System (19 Carb Options)

Stop guessing at your TV cable adjustment. Bowler's Tru-Shift kit makes proper 700-R4 and 200-4R throttle valve calibration automatic — bolt on the bracket and cam, install the cable, run the throttle to wide open, and you're done. No carb removal. No pan drop. No pressure gauges. No more burned-up transmissions from wrong TV cable settings.

NOT compatible with:

• Quadrajet, Rochester, or any original-style 1- or 2-barrel carburetors
• FiTech LS Fuel Injection intakes
• 2.0 Holley Sniper and Sniper EFI Dual setups

Photo required before ordering: Quickfuel, Holley Street Warrior, Brawler, and Aces carburetors. Email photos of the carb base and throttle arm to info@bowlertransmissions.com or call 618-943-4856 before ordering.

 FiTech owners: A measurement check is required to confirm fitment. FiTech Tru-Shift measurement guide (PDF)

Why builders choose Tru-Shift:

• Auto-adjusting — bolt it on, push the pedal once, you're calibrated
• No transmission pan drop required
• No pressure gauge required
• Eliminates the #1 cause of premature 700-R4/200-4R failure (wrong TV cable adjustment)
• Made in USA by Bowler Performance Transmissions

Throttle Cable Brackets Included in Every Kit:

• GM Round Hole
• GM Square Hole
• Lokar 

Optional: Lokar / Lokar Cruise bracket can be ordered separately.

Choose your carburetor variant above. Compatible with Edelbrock, Holley, Demon, FiTech, MSD, QuickFuel, Aces, and more — 19 carb-specific options available.

Note: If you have a Quickfuel Carburetor, Holley Street Warrior,  Brawler or Aces Carburetor, we will need to see pictures of the base and the throttle arm to determine which brackets will best suit your application. Please email us pictures at info@bowlertransmissions.com or call us at 618-943-4856.

** Sorry, we do not have anything for Quadrajet, Rochester, or any single or two-barrel original-style carbs **  

** We do not have anything for the Fitech LS Fuel Injection Intake ** **Please note that if you do have a FiTech we have a measurement you need to take to make sure it will fit - See the attached Image of how to measure your FiTech.

FITech Tru-Shift System Measurements 

If you would like more information on the Bowler Performance Transmission Tru-Shift, give us a call at 618-943-4856 or e-mail us at info@bowlertransmissions.com

Instructions are found on our Resource page HERE.

Throttle Cable Bracket Options (All Three Are Included In The Tru-Shift Kit) GM Round Hole, GM Square Hole, Lokar / Gennie *Optional Lokar / Lokar Cruise Can Be Ordered Separately