Bowler Performance TKX NightStick Short-Throw with 1" offset shifter for 1967 or 70-72 Camaro factory console

The NightStick offset shifter for the Tremec TTKX is perfect for applications that require a specific shifter placement.

Features include a 1" side offset, a throw that is 25% shorter than the factory Tremec, a leak-proof O-ring seal, and installation hardware included.

This unit comes equipped with a 1" side offset. Ideal for '67 Camaro factory console in the forward position or a '70-'72 Camaro in the rear position, but can also be used for many other custom applications.
The Night Stick shifter is sent out with a predetermined shift lever location set. If you need or want the shifter in a different location, you can easily adjust the settings.
The upright for the shift lever is held on with a nut and interference fit similar to that of a ball joint. This piece can be rotated 360* and can be locked back down in any position. The holes that attach the shift lever are threaded all the way through, so you can mount your shift lever from either side. We always recommend using locking nuts, washers, or thread locker for the shift lever attachment bolts to prevent them from coming loose.
The offset base bracket also has an octagonal pattern machined into the attachment point to allow full 360* rotation as well. Simply unbolt and rotate to whichever position is best for your application. Additionally, 1" x 1/2" or 2" side offset adapters are available for other custom applications.
The TKX NightStick design retains the use of the original Tremec base plate. The Tremec TKX transmissions have a proprietary bias spring design used to locate the center on the shift rail. We felt that there wasn’t any reason that this needed to be re-invented, so we opted to redesign the shift stub pin to allow us an attachment point for the offset shift lever bracket. We pre-assemble and ship you a completely new base plate and stub to ensure that the bias springs are set to the correct pre-load.